Seed Priming Application Guides

seedpriming-application-guides

Seed
Priming

PRODUCTS

  • BSN Superstrike
  • BSN Hybrid
  • Interceptor XS
  • BSN Ultra
  • BSN-10

MACHINE APPLICATION

inline-application

Inline
Application

auger-spray

Auger Spray
Application

drum-priming

Drum Priming
Application

MANUAL APPLICATION
spray-and-mix

Spray and
Mix

bag-or-packet

Bag or
Packet

container-or-bucket

Container or
Bucket

RATES

application-table
Absorbed-in-20-minutes

Do not sow seeds on day of application.

BSN can be applied to seeds anytime between harvest and seeding. For best result, prime seeds well before sowing time preferably during dry season after harvest.

Always use clean seed as dusty seed causes stickiness and can tie-up BSN nutrient reducing uptake.

Priming at Seeding Time

Primed seeds should be sown at least one day after treatment. If you prime seeds at seeding time, you may notice that primed seed lot volume increase by 10%, this is reversed quickly when seeds lose their extra moisture. When you drill treated seeds soon after treatment, you may need to allow for increased volume if volume increase is not fully reversed.

MIX

mixing

BSN Mixing

BSN “imbibed” nutrient inside the seed - caution must be taken when using chemicals. ALWAYS apply BSN first or mix water and BSN before adding chemical.

Product Compatibility + Jar Testing

Do not mix with Alkaline Copper fungicides or innoculants
If you are unsure, we recommend a simple jar test of products.
Mix together and check if reaction occurs.

Check www.rlfchemtest.com